conr33
New Member
Hi guys, Im new to the forum so wanted to ask some of you knowledgeable members about wheels. I have searched online and the search engine on here but haven't found all the info i need.
Im going to buy a set of vmr vb3's for my sv6 sedan, have my eye on a set for a bmw which have the same 5x120 stud pattern, the centre bore is 72.6mm so I will need some sort of shim to make it fit that way. Offset is front 19x8.5inch 40mm and rear 19x9.5inch 45mm, will that fit ok? I want to lower it to top of the tyre or slightly over without it catching but not sitting in too far either.
Sorry for the long post!
Im going to buy a set of vmr vb3's for my sv6 sedan, have my eye on a set for a bmw which have the same 5x120 stud pattern, the centre bore is 72.6mm so I will need some sort of shim to make it fit that way. Offset is front 19x8.5inch 40mm and rear 19x9.5inch 45mm, will that fit ok? I want to lower it to top of the tyre or slightly over without it catching but not sitting in too far either.
Sorry for the long post!