Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Ve won't start keypad don't work

Discussion in 'VE Holden Commodore (2006 - 2013)' started by Ve ss ex cop with 6.2l, Mar 30, 2017.

Tags:
  1. Mar 30, 2017 #1
    Ve ss ex cop with 6.2l

    Ve ss ex cop with 6.2l New Member

    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Joined:
    Mar 30, 2017
    Location:
    Ambarvale
    Members Ride:
    Ve ss Ve club sport
    my engine light was on so I scanned it with my obd11 found out my knock sensor was not connected cleared the code as I went to disconnect it my dash started flashing with the (brake) light followed by the airbag and followed the abs and then contact dealer then the car would not start and alarm went off when I locked it and then unlocked it but I had to use the key not the pad as it didn't work anymore thinking it was the battery to my remote went and replaced it nothing every time I try to connect the car battery the alarm goes off and I have to disconnect the battery again I only brought the car about 2 weeks ago any advice or help would be great thank you
     
    Ve ss ex cop with 6.2l, Mar 30, 2017
    #1
  2. Mar 30, 2017 #2
    Ve ss ex cop with 6.2l

    Ve ss ex cop with 6.2l New Member

    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Joined:
    Mar 30, 2017
    Location:
    Ambarvale
    Members Ride:
    Ve ss Ve club sport
    I did write hello first I'm sorry it's not there straight away thx again Matt
     
    Ve ss ex cop with 6.2l, Mar 30, 2017
    #2
  3. Mar 30, 2017 #3
    greenacc

    greenacc Searching for the billion

    Messages:
    5,401
    Likes Received:
    965
    Trophy Points:
    113
    Joined:
    Jul 13, 2008
    Location:
    Sydney
    Members Ride:
    VE Berlina
    What type of scanner did you use?
     
    greenacc, Mar 30, 2017
    #3
  4. Mar 30, 2017 #4
    Ve ss ex cop with 6.2l

    Ve ss ex cop with 6.2l New Member

    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Joined:
    Mar 30, 2017
    Location:
    Ambarvale
    Members Ride:
    Ve ss Ve club sport
    I used a plus quip obd11 /eobd
     
    Ve ss ex cop with 6.2l, Mar 30, 2017
    #4
  5. Mar 31, 2017 #5
    NU13

    NU13 Well-Known Member

    Messages:
    1,581
    Likes Received:
    39
    Trophy Points:
    48
    Joined:
    Mar 22, 2013
    Location:
    New Zealand
    Members Ride:
    2007 E1 HSV GTS Manual
    Faulty BCM i think.
     
    NU13, Mar 31, 2017
    #5
  6. Mar 31, 2017 #6
    Ve ss ex cop with 6.2l

    Ve ss ex cop with 6.2l New Member

    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Joined:
    Mar 30, 2017
    Location:
    Ambarvale
    Members Ride:
    Ve ss Ve club sport
    i had mechanic come out today and he couldn't figure it out he told my wife the bcm was not responding when I got home from work I tried to start it and it started with no warning lights on the dash fingers crossed it doesn't happen again thanks for the advice I'm gonna go get a new key to be safe hoping it fixed itself
     
    Ve ss ex cop with 6.2l, Mar 31, 2017
    #6
  7. Apr 1, 2017 #7
    NU13

    NU13 Well-Known Member

    Messages:
    1,581
    Likes Received:
    39
    Trophy Points:
    48
    Joined:
    Mar 22, 2013
    Location:
    New Zealand
    Members Ride:
    2007 E1 HSV GTS Manual
    I suspect it wont be fixed. I think (and i could be wrong) that the BCM is on it's last legs. I think the key is fine but it's up to you if you outlay cash for it. Take it to Holden get them to check the BCM.
     
    NU13, Apr 1, 2017
    #7

Share This Page