VF Bi Modal Electric Actuators Diagrams/Schematic

[VECalaisV8Wagon]

Just buy the Varex mufflers.

 

[Mattricho]

@rucxy i have mine off of accessories power in the boot with no problems at all.
I used a fuse tap on the 20a INT/APO. And there is 5-6 other fuses you could use like “front vent seat ing”

 

[rucxy]

All good, i stand corrected.
Is yours a VF1 or VF2?

@rucxy i have mine off of accessories power in the boot with no problems at all.
I used a fuse tap on the 20a INT/APO. And there is 5-6 other fuses you could use like “front vent seat ing” View attachment 210596View attachment 210597

 

[426Cuda]

Yes that I was thinking, Did a googling on this yesterday and it not like swapping the polarity over to get the butterfly to open or close but to use a PWM (Pulse Width Modulation) is overboard for a simple device like the motor on the actuators so what does send these PWM square wave out. They must have a Separate unit to do this from the Mylink to the BCM to whatever that give the PWM then to the Valves.

I wonder if anyone has succeeded using the Bi modal mufflers on a VF that was not designed to have bi modal to start with. ( I will look at the above links)

Yeah I have. I'll send you a contact for a bloke that makes and sells these for about $150. Simple plug and play.

 

[Mattricho]

@VFSV6FORME you could just buy the sedan mufflers and when your getting the new valves welding on you could get them to extend the pipes as well.

 

[Mattricho]

@rucxy my15 VF1

 

[rucxy]

Shame they dont have a switched accessory feed in the boot of my 06 SS-V

@rucxy my15 VF1

 

[426Cuda]

I was just going to get one of these, anyone used one?
https://www.ultimateconversionwiring.com.au/store/bimodal-retrofit-module

Yes, this is the one I used. Worked perfectly. I turn the bi-modals on/off via a key chain fob. He is very good to deal with too. Very helpful. Just don't pull the black box apart like i did! There is no need.

 

[Jayssvz]

Did you know you have the VF2 bimodal relay and bimodal fuse installed already?

 

[Jayssvz]

Do you realise you have the Bimodal relay and fuse installed in your fuse bay there

@rucxy i have mine off of accessories power in the boot with no problems at all.
I used a fuse tap on the 20a INT/APO. And there is 5-6 other fuses you could use like “front vent seat ing” View attachment 210596View attachment 210597