diysv6
Active Member
- Joined
- Dec 17, 2005
- Messages
- 547
- Reaction score
- 28
- Points
- 28
- Location
- SEQ
- Members Ride
- VF S1 SV6 STORM A6: VZ S1 SV6 A5
I am looking at replacing my battery 2015 July build, Series 1, SV6 sedan.
The battery is held down by a clamp bolted to the battery carrier.
The battery is also held from above with a fabric strap extending from the battery carrier over to the metalwork that holds the fuse block etc.
The existing acdelco is CCA525; RC 105min C20 60AH, ventilation on LHS.
The dimensions of the original battery are L=240. Width 170mm and height 175mm.
An appealing battery is a acdelco S57220
L=277mm; Width 174mm; height 188mm.
Does the battery metal base have to be changed to fit the S57220 which is longer by 37mm? (There appears to be another hole in the base plate which could cater for the longer battery).
The height is 188mm versus original 175mm. Difference about 13mm in height.
Is there a longer fabric tied down required to suit the bigger battery?
Thanks in advance
The battery is held down by a clamp bolted to the battery carrier.
The battery is also held from above with a fabric strap extending from the battery carrier over to the metalwork that holds the fuse block etc.
The existing acdelco is CCA525; RC 105min C20 60AH, ventilation on LHS.
The dimensions of the original battery are L=240. Width 170mm and height 175mm.
An appealing battery is a acdelco S57220
L=277mm; Width 174mm; height 188mm.
Does the battery metal base have to be changed to fit the S57220 which is longer by 37mm? (There appears to be another hole in the base plate which could cater for the longer battery).
The height is 188mm versus original 175mm. Difference about 13mm in height.
Is there a longer fabric tied down required to suit the bigger battery?
Thanks in advance