Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

vh carby help

mojo_gc

New Member
Joined
Mar 19, 2011
Messages
13
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VN
Hey guys so finally got my vh running was just wondering if anyone knew where to get a vh carby manual from, she doesnt seem to be idiling to well was going to get into the fuel/air ratio screw and have a muck around but want know what the stock setting is first..

Anyone be any help
 

mojo_gc

New Member
Joined
Mar 19, 2011
Messages
13
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VN
****, sorry that would probably help, its a 202 blue top with a varajet 2 carby
Reece
 

mojo_gc

New Member
Joined
Mar 19, 2011
Messages
13
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VN
so no one can tell me what the stock setting for the fuel/air ratio, its been molested need to get it back to the stock setting and can go from there? Dont really want to buy a book, if you can understand only a shitter for the farm...
 

ari666

250,000 hits
Joined
Mar 10, 2009
Messages
11,829
Reaction score
119
Points
63
Location
melbourne
Members Ride
1966 impala, R32 GTR
initial timing should be at 6 degrees @900 rpm. if its auto, then make sure its in D. stick a vacuum guage of full vac (off the carb, dont use manifold vac) then turn the idle mixtures in all the way, then back them off 3 full turns. after that its about 12 hours of really fine adjustments until you achieve the highest STABLE reading.
 

mojo_gc

New Member
Joined
Mar 19, 2011
Messages
13
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VN
Hi sorry i have taken so long just been pretty full on with uni at the moment, can someone please tell me what this screw is and what its standard setting is, i just want to get her running again for the farm on sunday..
Reece
 

Attachments

Top