Vh fuel line help

[Nervous1]

Hi all, about to run a sniper set up on Vh sle. Pulled wheel off to find all these disintegrated lines- any one know what they are for? And the thing attached to the fuel feeder? There are two that poke out squashed under the tank as well?Also I note i have 3 hard lines running to front- charcoal i assume, ( think that’s in the pic with white tip), main line and a smaller return that comes out of filter and runs back to sender unit. Anyone know if I can use that line as a return ( if changed to 3/8)?

 

[vt_II_senator_sig]

Howdy, I had the same issue with all the fuel lines in my sl/e where they had perished and broken. I just replaced mine with like for like from fuel lines at repco, im not sure if its an issue going larger lines or not, sorry...

I cant remember who, but someone here helped me with a diagram and short explanation on repairs. I remember having to drop the tank and then frustratingly putting it all back together without crimping and breaking plastic bits, but i still had the basic diagram of what the lines were for...

here is a link to a previous post here about the vapour lines which included the following image.

vapour lines

I hope this helps