Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VH Holden dash loom

Ash.Mcdonald

New Member
Joined
Sep 2, 2019
Messages
8
Reaction score
0
Points
1
Age
29
Location
Christchurch New Zealand
Members Ride
83 vh. 96 vs. 98 vt.
Hi guys
Apologies in advance if this is an already asked question I couldn't find a post anywhere.
I am installing the interior loom in my VH just wondering if anyone has a picture or diagram of were the loom should sit under the dash I have currently poked it all through the triangle holes on the bracket above the steering column and run it down the channel on the brace once done I realised there is a clip to hold it up somewhere but will that be good enough to leave?
Sorry for a dumb question,bloody Kiwis ae
On the note of dumb questions does anyone also have a diagram of how all my heater plastics piece together I have a book but it doesn't really tell me much in regards to how it all goes

Thanks in advance
 

!Miffy68!

New Member
Joined
Sep 9, 2019
Messages
5
Reaction score
0
Points
1
Age
55
Location
Bacchus Marsh
Members Ride
1981 VH SLE
Hope this helps, if you need more ask.
 

Attachments

  • 20190909_165810_resized.jpg
    20190909_165810_resized.jpg
    289.9 KB · Views: 261
  • 20190909_165816_resized.jpg
    20190909_165816_resized.jpg
    171.3 KB · Views: 285

!Miffy68!

New Member
Joined
Sep 9, 2019
Messages
5
Reaction score
0
Points
1
Age
55
Location
Bacchus Marsh
Members Ride
1981 VH SLE
How's this. Also do you know were the red and orange wires at the top go and what is the relax thingy on the firewall behind the dash. Cheers Mark
 

Attachments

  • 20190909_170748_resized.jpg
    20190909_170748_resized.jpg
    371.5 KB · Views: 279

Ash.Mcdonald

New Member
Joined
Sep 2, 2019
Messages
8
Reaction score
0
Points
1
Age
29
Location
Christchurch New Zealand
Members Ride
83 vh. 96 vs. 98 vt.
Perfect thanks mate.no sorry Iv only just managed to get my loom half in I haven't found them yet. I'm in the process of building the car but I wasn't the one that pulled it apart so struggling to work some of the wires out
 

!Miffy68!

New Member
Joined
Sep 9, 2019
Messages
5
Reaction score
0
Points
1
Age
55
Location
Bacchus Marsh
Members Ride
1981 VH SLE
LOL, I'm fixing the car for a friend in Tassie. I have to replace a cam shaft yet as the engine backfires up thru the carby.
 
Top