Stretchomatic
Member
- Joined
- Apr 15, 2005
- Messages
- 941
- Reaction score
- 4
- Points
- 18
- Age
- 35
- Location
- Ardlethan, NSW
- Website
- www.facebook.com
- Members Ride
- 86 VL Berlina M5
hey guys, recently picked up a vk 308 that had been sitting for a month or two. done a service and it runs fairly good. just a few little things that i would like to iron out.
1. when u give the throttle a sharp hit it nearly stalls, though if u ease on the throttle or tap it quickly a few times it revs not bad. spraying carb cleaner definitely made this a lot better, but still does it.
2. stalls when put in reverse, on an up hill slope it wont reverse, goes fine down hill lol.
3. tacho and temp guage dont work, where are they picked up from and what does the sensor look like? i'm pulling the dash out soon to check the air con and what not, so i'll have a look there.
im sure there is other little things, but i can remember right now.
any info would be great, cheers
jason.
1. when u give the throttle a sharp hit it nearly stalls, though if u ease on the throttle or tap it quickly a few times it revs not bad. spraying carb cleaner definitely made this a lot better, but still does it.
2. stalls when put in reverse, on an up hill slope it wont reverse, goes fine down hill lol.
3. tacho and temp guage dont work, where are they picked up from and what does the sensor look like? i'm pulling the dash out soon to check the air con and what not, so i'll have a look there.
im sure there is other little things, but i can remember right now.
any info would be great, cheers
jason.