bwaitch
New Member
- Joined
- Feb 4, 2022
- Messages
- 7
- Reaction score
- 4
- Points
- 3
- Age
- 80
- Location
- west gippsland
- Members Ride
- HSV VR Senator 215i , 6 speed manual
I have just purchased a set of " VK " HDT Replica 19" Aeros from HDT in Brisbane with the intention of fitting to my Brock Group A replica .
On endeavouring to fit them , to what is a stock VK disc brake front end , I find that they will not fit as the off set causes the tyres [ 245/40 ] to make contact with the towers . in addition the original studs appear too short .
As I'm not a mechanics bootlace , the above may confirm my lack of knowledge .
Any advice , as to sorting this or similar problem, would be very much appreciated .
Perhaps I have opened up a can of worms and will need to start again .
In anticipation .
Many thanks .
Barry .
On endeavouring to fit them , to what is a stock VK disc brake front end , I find that they will not fit as the off set causes the tyres [ 245/40 ] to make contact with the towers . in addition the original studs appear too short .
As I'm not a mechanics bootlace , the above may confirm my lack of knowledge .
Any advice , as to sorting this or similar problem, would be very much appreciated .
Perhaps I have opened up a can of worms and will need to start again .
In anticipation .
Many thanks .
Barry .