Vk HDT 19" replica wheels

[bwaitch]

Many thanks for each and everyone that responded , sorry for the delay but took a while to sort out how to respond .
HDT supplied the wheels with specific reference to VK , have endeavoured to contact them with no response .
As suggested , perhaps the tyres are too tall @ 40 will need to investigate further or consider selling them on to someone that has the correct vehicle for fitment .
Such a shame as they really finish the Mocky off .
Again , many thanks .

 

[sire01TMK]

Might be a better fit with this setup

https://www.ebay.com.au/itm/302146223125

 

[bwaitch]

Might be a better fit with this setup

https://www.ebay.com.au/itm/302146223125

Many thanks for your suggestion , appreciated .

 

[Borntobewild]

I have just purchased a set of " VK " HDT Replica 19" Aeros from HDT in Brisbane with the intention of fitting to my Brock Group A replica .
On endeavouring to fit them , to what is a stock VK disc brake front end , I find that they will not fit as the off set causes the tyres [ 245/40 ] to make contact with the towers . in addition the original studs appear too short .
As I'm not a mechanics bootlace , the above may confirm my lack of knowledge .
Any advice , as to sorting this or similar problem, would be very much appreciated .
Perhaps I have opened up a can of worms and will need to start again .
In anticipation .
Many thanks .
Barry .

I'm running 19inch irmschers with 235s
I put VR to VZ front struts in mine