304 VN AERO REBUILD (304 stroked to 350ci flat top pistons std 4" bore)

[bjf66]

was hoping to get more done in long weekend, but boss had other ideas looking for lounge suites

finished down the passenge side of car, and under belly

• cleaned up inside front guard
• blow torch, scraper, wire brush, 4" rotary wire wheel, all being used together to get job done
• heavy duty cleaner, double soak
• Feronite oxide covertor (no rust but thought would use to seal bare metal)
• KBS Chassis black
• Once I have finished the complete chassis and under body with one coat of chassis black, will apply second coat

stages of process

 

[bjf66]

Got away to NZ for 2 weeks, for small break,
back into car in coming days
Ordered set of Crow CRHL8167 stainless 17/4 rockers
They look quite pretty all polished up
1 day delivery cant moan at that service

 

[losh1971]

Try to avoid Crow springs if you can. They tend to snap on LS so I assume it could be the same with Holden engine.

 

[bjf66]

yes haven't looked at springs yet need 148 psi on seat, and 385 psi open
just thought I would start getting the parts lined up

 

[Deuce]

Got away to NZ for 2 weeks, for small break,

And you didn't pop in for a cuppa??

 

[bjf66]

And you didn't pop in for a cuppa??

yes sorry about that, was down in Pukekohe for most of time
where are you located ?
I'll need to get back there in few months

 

[Deuce]

yes sorry about that, was down in Pukekohe for most of time
where are you located ?
I'll need to get back there in few months

Immortality is about 1/2hr north of there.
I'm about 5hrs south of there.

 

[bjf66]

went on tiki tour through Mt Eden-Onehunga, back to Mangere Bridge where used to live, then back to puke
good to see traffic on freeway has improved, or should I say road works has reduced
great to hear the cars going around Puke track in weekends,
went to Ch-Ch for the day to see few customers, need to get down to Wanganui at some point
nice to have a few servings of NZ green tip mussels and few bottles of Steinlarger

 

[Deuce]

need to get down to Wanganui at some point
nice to have a few servings of NZ green tip mussels and few bottles of Steinlarger

Oh wow.
Yeah, send me a message if you are in the area.

 

[bjf66]

STAR MANIFOLD NECK
nice to puchase and weld yourself into manifold

Brand New VN-VT Holden & HSV 5Ltr 5.7Ltr Starr Performance inlet manifold neck | eBay

"Aussie"Holden 5Ltr & HSV stroker 5.7Ltr. VN / VP / VR / VS / VQ / VT. Modification of your original manifold will be required as the new Starr inlet neck will need to be welded to the manifold and a new 90mm or 100mm throttle body fitted.

www.ebay.com.au