Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Vn Calais Tranny Prob??

Discussion in 'VN - VP Holden Commodore (1988 - 1993)' started by Sir VxSs, Apr 26, 2008.

  1. Sir VxSs

    Sir VxSs Its gotta B a GenIII !!!

    Messages:
    306
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Aug 23, 2007
    Location:
    Western Suburbs MeLbOuRnE
    Members Ride:
    Vx Ss II 6SpD
    hey guys vn calais V6 Auto. happens random times some times dosent want to change into next gear sits at 4000 to 5000 RPM before finally kickng up gear:bang: holds sometimes for 5 to six seconds sometimes even up to a minute! only started after having tranny serviced before the service never had a problem!!tranny fluids full and kleen HeLp plz:thumbsup:
     
  2. redcedar

    redcedar workaholic

    Messages:
    111
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Nov 9, 2005
    Location:
    coffs harbour
    Members Ride:
    Alto Grey MY12 SS
    the answer is a no brainer .Take it back and tell them to fix it !!!!!!!!
     
  3. vnv8driver

    vnv8driver Banned

    Messages:
    992
    Likes Received:
    12
    Trophy Points:
    0
    Joined:
    Aug 30, 2007
    Location:
    Up your mum
    Members Ride:
    304 Calais
    could be as simple as a kickdown cable adjustment, there should be a how to somewhere around here.
     
  4. PaRaDoX

    PaRaDoX Because Racecouch...

    Messages:
    3,286
    Likes Received:
    32
    Trophy Points:
    48
    Joined:
    Apr 16, 2005
    Location:
    Melbourne, Victoria
    Members Ride:
    none
    of course your going to have problems with trannys after you service them, you'll need lots of lubrication to go anywhere.... ohhhh

    were talking about TRANSMISSIONS...oops

    check your fluid level, kick down cable and plugs to the transm the T700 still uses eletronic signals from the ECU just not as complex as the VR (ie determines max shift point from RPM limiter)

    but most of all take it back and say you ****ed it up to the "mechanics" :p
     

Share This Page