Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VN cranks but has no spark ...

skinart

New Member
Joined
May 3, 2009
Messages
2
Reaction score
0
Points
0
Members Ride
VN
Hey guys, my friend has a VN V6 and for a while it had intermitant starting, somtimes it would start somtimes it wouldnt, and now it just cranks and has no spark at all.

We jumped the black /white wires near the computer and we get 4 flashes, then a break, then 1, so we assumed this was a code 41 which saiz its the crank angle sensor, so we replaced that yesterday and its still cranking and has no spark.

Also after we replaced the crank angle sensor we still get 4 flashes then 1, does this have to be reset or does this mean there still is a problem?

Anyone have any ideas of what may be wrong?

Thanx in advance guys.
 

centy

Member
Joined
Jun 29, 2008
Messages
911
Reaction score
6
Points
18
Members Ride
Vp series 2
remove the engine fuse for 30 seconds and try again.
could be plug left out or broken wire to cas to.
 

Pub247

Well-Known Member
Joined
Apr 14, 2006
Messages
3,372
Reaction score
58
Points
48
Location
Melbourne S.E.
Members Ride
Ford Fairmont
yes best to disconnet the ecu for a bit mine did this same thing when i changed the cas
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,993
Reaction score
434
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
it can get that code when the dfi under the coils dies too so if its still there after an ecu reset check the plug on the dfi and then replace if its no better
 
Top