Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VN hall effect sensor

Chev28

New Member
Joined
Aug 5, 2022
Messages
1
Reaction score
0
Points
1
Age
69
Location
Pine Mt
Members Ride
VB commodore
Hi. Was told that a VN speed sensor will also work on a M21 gearbox. am currently running VB 308 with M21 gear box in a hot rod. Due to behind dash restrictions I want to run an electric Speedo but require a hall effect sensor on the gearbox. I believe the thread sizes are the same on the M21 and the T5 boxes but would you be able to wire it so it sends a signal through the wiring to the electric Speedo
 

07GTS

Well-Known Member
Joined
Sep 8, 2013
Messages
4,953
Reaction score
6,509
Points
113
Location
Australia
Members Ride
VEGTS BUILT BLOWN E85
just need 3 wire loom with the power and earth to it and signal to the speedo, also if ur using aftermarket speedo may have to see if the speedo has a voltage on the signal wire or not, if it dosnt then use a 10k resistor from the speed sensor power wire to the signal wire so the sensor has a voltage to pull down
 
Top