Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

vn,p,r turbo kit coming soon stage 3 and 4

Discussion in 'V6 Development And Modification' started by boosted, Feb 8, 2006.

Page 1 of 2
  1. Feb 8, 2006 #1
    boosted

    boosted New Member

    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jan 26, 2006
    Members Ride:
    vn turbo
    soon to be released ???? interested i would like to hear your thoughts as we might be able to arrange group purchase of these systems :driving:

    here are some details
    stage 4 kit as pictured
    2 x custom s/steel turbo manifold
    1x s/steel balance pipe ( with v-clamps and fittings )
    1 x kkk 600r turbocharger ( rated over 600hp )
    1 x 40mm external wastegate
    1 x 3 inch s/steel dump pipe ( from turbo )
    1 x 40mm screamer pipe ( from wastegate )
    1 x 4 inch pod filter
    teflon s/steel oil feed lines, gaskets, oil sender t, and fittings
    oil drain lines , hose barbs ( for sump return )
    , 1 x rising rate fuel regulator ( vortec f.m.u )

    price 3500.00 + shipping

    liquid/air intercooler kit
    1 x 50mm billet b.o.v
    1 x liquid/air intercooler ( 600hp )
    2 x braided water lines and fittings
    1 x 12volt high volume water pump
    1 x water cooler ( for front of car )
    s/steel 3 inch intercooler pipes
    1 x throttlebody adaptor s/steel 3 inch
    slicone hose, t-bolt clamps ect

    price 1499.00
     

    Attached Files:

    boosted, Feb 8, 2006
    #1
  2. Feb 8, 2006 #2
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    where does it come from? ie area?
     
    kwik6, Feb 8, 2006
    #2
  3. Feb 8, 2006 #3
    kowan

    kowan Clayton's Commodore

    Messages:
    355
    Likes Received:
    8
    Trophy Points:
    0
    Joined:
    Sep 5, 2005
    Location:
    Far North QLD
    Members Ride:
    91 Clayton's Commodore/Toyota Lexcen
    wow....I knew there was a reason I kept that S2 motor in the shed
     
    kowan, Feb 8, 2006
    #3
  4. Feb 8, 2006 #4
    boosted

    boosted New Member

    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jan 26, 2006
    Members Ride:
    vn turbo
    victoria area
     
    boosted, Feb 8, 2006
    #4
  5. Feb 8, 2006 #5
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    wouldnt be in cranbourne would it, or hampton park??
     
    kwik6, Feb 8, 2006
    #5
  6. Feb 8, 2006 #6
    boosted

    boosted New Member

    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jan 26, 2006
    Members Ride:
    vn turbo
    boosted, Feb 8, 2006
    #6
  7. Feb 8, 2006 #7
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    ahh k thanks. i know a couple of places down cranbourne way in sth east melb that do it for $6000. I had mine done for just les than $3000 but thats mates rates at Micks dyno tuning in Dandenong.
     
    kwik6, Feb 8, 2006
    #7
  8. Feb 8, 2006 #8
    boosted

    boosted New Member

    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jan 26, 2006
    Members Ride:
    vn turbo
    its a small world?? we send our own cars to mike as we know him well , he suggested we make a kit for the v6 holden boys, we have been building custom turbo systems for the falcon 6 for the past 5 years , we are looking into the holden market first before we go in to far!!! how has your system performed thus far?? do you have any pictures?? any comments / setbacks you have encountered??
     
    boosted, Feb 8, 2006
    #8
  9. Feb 8, 2006 #9
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    no problems so far. i keep it on 7psi daily running and it made 210rwk last dyno day.
    Mike's white eb ford ran low 10's with the straight 6!! the only picture i have is my avatar
     
    kwik6, Feb 8, 2006
    #9
  10. Feb 8, 2006 #10
    boosted

    boosted New Member

    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jan 26, 2006
    Members Ride:
    vn turbo
    do you work for/with mick??
     
    boosted, Feb 8, 2006
    #10
  11. Feb 8, 2006 #11
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    no but my mate Johnny and rick do.
     
    kwik6, Feb 8, 2006
    #11
  12. Feb 8, 2006 #12
    greenfoam

    greenfoam New Member

    Messages:
    7,900
    Likes Received:
    124
    Trophy Points:
    0
    Joined:
    Jan 13, 2005
    Members Ride:
    VP Executive R-spec
    ooo, You are going to sell lots of these :). I don't know if it will be safe to line up an V6 VN-VR at the lights ever again, they might gain a VL turbo style fear factor, home grown buick grand nationals :thumbsup:
     
    greenfoam, Feb 8, 2006
    #12
  13. Feb 8, 2006 #13
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    haha thats what i have been beginning to think!! and the kits will just keep getting cheaper since its only just really become a popular thing to do to the VN-VP series!!
     
    kwik6, Feb 8, 2006
    #13
  14. Feb 8, 2006 #14
    vrd00m

    vrd00m Guest

    fug oath, it's about time someone put together a cheap (not bloody $5000+) turbo kit.

    look forward to seeing the 3800 win some back!
     
    vrd00m, Feb 8, 2006
    #14
  15. Feb 8, 2006 #15
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    vrdoom that thing is a monster in ur hands!! no not ur pet python lol
     
    kwik6, Feb 8, 2006
    #15
  16. Feb 9, 2006 #16
    defa

    defa New Member

    Messages:
    1,286
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    Feb 1, 2006
    Members Ride:
    VN Commodore
    kwik6 what did you do to your motors internals. or is it just stock.. my motoris stock so when i turbo it hopefully it won't die too early.. also what did you do about your computer... any info would be good to be honest..
     
    defa, Feb 9, 2006
    #16
  17. Feb 9, 2006 #17
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    ok the internals are stock and the computer is remapped by Mike's dyno tuning in Dandenong, melbourne. they told me as long as i keep it no higher than 8psi there is no problem with the internals.
     
    kwik6, Feb 9, 2006
    #17
  18. Feb 10, 2006 #18
    defa

    defa New Member

    Messages:
    1,286
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    Feb 1, 2006
    Members Ride:
    VN Commodore
    well there ya go.. if you are getting that much power at 7psi. i think i might stick with that too. did you change injectors or anything.. i have an AIC i am going to use. but by the sounds of thing it may not be needed..
     
    defa, Feb 10, 2006
    #18
  19. Feb 10, 2006 #19
    kwik6

    kwik6 stroke it baby

    Messages:
    362
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Feb 2, 2006
    Location:
    rowville, melbourne
    Members Ride:
    vz ss cobalt blue/ hk prem chev
    yeah regardless u must change injectors and fuel pump and remap a memcal chip.
     
    kwik6, Feb 10, 2006
    #19
  20. Feb 11, 2006 #20
    defa

    defa New Member

    Messages:
    1,286
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    Feb 1, 2006
    Members Ride:
    VN Commodore
    what injectors are you running and sort fuel pump are you using..
     
    defa, Feb 11, 2006
    #20
Page 1 of 2

Share This Page