psi3800
New Member
- Joined
- Nov 21, 2011
- Messages
- 45
- Reaction score
- 0
- Points
- 0
- Location
- South Australia
- Members Ride
- vn turbo
Name: Aaron
Car : 1989 VN Executive
Colour: Phoenix Red (2pac metallic + pearl)
Engine: 3.8ltr Single Turbo
Engine mods: Mahle Forged Pistons, Removed balance shaft, Camtech Turbo cam, Double row timing chain, Series 2 inlet manifold+ custom lines to suit, Garrett GT35/40R @14psi + intercooler. F6 Typhoon injectors.
Gearbox: Built auto running 2600 stall converter (B&M Quicksilver shifter) ,ASE trancooler +braided line to the trans
Diff: 3:45 KAAZ LSD
Exhaust: 3 inch cat back
Wheels: 18" Cv8z's with whitewalled tyres
Suspension: Super Lows
Interior: VS Statesman/ vs senator seats awaiting to be re-trimmed in black leather
Other Mods: smoothed bumpers, baffled breather box, v8 heater tap, re-located fuse box+ battery, VE 330mm front brakes+ 1 inch master cylinder
Cost: free
Build time: 2004 till now (never finished)
Future Mods: see thread
I'm currently in the process of hiding all of my wiring and mounting my fuse box assembly in behind my glovebox. The motor is currently being built and will be ready in the next few weeks.
Car : 1989 VN Executive
Colour: Phoenix Red (2pac metallic + pearl)
Engine: 3.8ltr Single Turbo
Engine mods: Mahle Forged Pistons, Removed balance shaft, Camtech Turbo cam, Double row timing chain, Series 2 inlet manifold+ custom lines to suit, Garrett GT35/40R @14psi + intercooler. F6 Typhoon injectors.
Gearbox: Built auto running 2600 stall converter (B&M Quicksilver shifter) ,ASE trancooler +braided line to the trans
Diff: 3:45 KAAZ LSD
Exhaust: 3 inch cat back
Wheels: 18" Cv8z's with whitewalled tyres
Suspension: Super Lows
Interior: VS Statesman/ vs senator seats awaiting to be re-trimmed in black leather
Other Mods: smoothed bumpers, baffled breather box, v8 heater tap, re-located fuse box+ battery, VE 330mm front brakes+ 1 inch master cylinder
Cost: free
Build time: 2004 till now (never finished)
Future Mods: see thread
I'm currently in the process of hiding all of my wiring and mounting my fuse box assembly in behind my glovebox. The motor is currently being built and will be ready in the next few weeks.
Last edited: