VN SII
New Member
- Joined
- Sep 16, 2012
- Messages
- 208
- Reaction score
- 0
- Points
- 0
- Location
- Yeppoon QLD
- Members Ride
- VN Executive SII - 91' - VX Executive SII - 02'
Long story short, my VN doesn't have Central locking. I've got a VS I use for scraps and was wondering if I was just able to take the Central Locking out of the VS and switch it over to my VN? I know I'd have to run wires through the doors and add the actual actuators to each door, and take the Sending/Receiving unit and plug it in. Would the Sender/Receiver plug right in or will I have to make some Modifications? (I.e are the Pins and such right? Enough space? Or even have to take the Locks off the VS and put them in my VN?)
Anyone done this before and have any tips?
"Edit; Thinking it'd be a heap easier to just change all the locks over to the ones on the VS, boot, ignition etc? Thoughts on this?;
Same questions goes for Electric Windows, a mate has a kit for a VS and I was wondering if it'd fit right in no issues?
If this thread needs to go into electrics or there was one already discussing this issue that I've missed, I'll delete this no problem.
Anyone done this before and have any tips?
"Edit; Thinking it'd be a heap easier to just change all the locks over to the ones on the VS, boot, ignition etc? Thoughts on this?;
Same questions goes for Electric Windows, a mate has a kit for a VS and I was wondering if it'd fit right in no issues?
If this thread needs to go into electrics or there was one already discussing this issue that I've missed, I'll delete this no problem.
Last edited: