Vn wont rev

[wilca014]

I was coming home the other day when my 1990 vn commodore died it took a while but i finally got it restarted, but i cannot get any revs out of the car, when you put your foot on the acclerator pedal it stalls.

Before: it stalled every know and then the car would die in revs and then surge.

Cheers
Colin

 

[dodgy]

Crank Angle Sensor or Coil Pack
Most likely the first

 

[beefcream]

very likley coil pack just dying.. i had this same prob

 

[mouce]

Check the fuel pump too.

 

[calais_cruzin]

yeah mine did tha samething, did the crank angle sensor first but it was the fuel pump.....my pump wouldnt hold pressure once the car was turned off n loose pressure after 25-30 min of drivin.....stop the car n restart it n it was fine for another couple kms...

 

[vn88calais]

Crank Angle Sensor or Coil Pack
Most likely the first

nah man crank angle sensor aint like that...the crank angle sensor works fine once u chuck water on it, wont kill it when u start it and put foot on accelerator cable...good guess tho, id say probably the coil pack...

but definatley not crank angle sensor...

cheers, Todd

 

[wilca014]

Cheers thanks for your help it was the fuel pump in the end.

Cheers
colin

 

[commy92]

My vp has just done this. You recon fuel pump.. FAR OUT... why didnt i keep that spare i had. grrrr whats a new fuel pump worth.

 

[commy92]

ok i worked my prob out. I ran out of fuel.. lol chucked the mower fuel in and went and put $30 in.. raped it for a bit.. and bobs ya uncle. all better now

 

[VN-SV-89-LE]

where is the crank angle sensor located on a VN?