Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Voot Voot noise & Vibration when doing 100kph

Stoker

New Member
Joined
Apr 21, 2009
Messages
13
Reaction score
0
Points
0
Members Ride
VX Executive S2
Hi, I have a VX Commodore Series 2 2002 and when I'm doing 100kph I get a voot voot noise coming from the front. There is also a slight vibration every time it makes that noise. When doing that speed and going around a left hand bend the noise goes away, but then when it straightens up noise comes back again, then when going around right hand bend noise does not go away. I have put in new lowered spings, shocks, radius rods & bushes, control arm bushes and I changed the left front wheel bearing hub and the noise is still there. any ideas on what it could be?? Should I possibly change the right Front Bearing hub as well??
 

kizza_VL

New Member
Joined
Nov 2, 2008
Messages
71
Reaction score
0
Points
0
Location
Sydney
Members Ride
vx s pac
G'day mate, i have a vx commodore too, and i had a vibration and stuff at 105ks + and i took it too holden and it ended up being that my crossmember had moved a tiny bit.
 

Stoker

New Member
Joined
Apr 21, 2009
Messages
13
Reaction score
0
Points
0
Members Ride
VX Executive S2
Thanks for the reply, So did the crossmember need to be replaced?
 

pablo

Donating member
Joined
May 29, 2006
Messages
760
Reaction score
8
Points
0
Location
Adelaide
Members Ride
Was a 1997 vt v6 wagon
Check that one (or both) of your engine mounts have not sagged, causing the sump to vibrate against the cross member!
 

kizza_VL

New Member
Joined
Nov 2, 2008
Messages
71
Reaction score
0
Points
0
Location
Sydney
Members Ride
vx s pac
sorry for the late reply. But no it didn't need replacing. They just losened it off and straightened it up.
 

6-PAC-ATTACK

New Member
Joined
Jan 15, 2006
Messages
78
Reaction score
1
Points
0
Age
41
Members Ride
VT EX S1 3.8L
Hi, I have a VX Commodore Series 2 2002 and when I'm doing 100kph I get a voot voot noise coming from the front. There is also a slight vibration every time it makes that noise. When doing that speed and going around a left hand bend the noise goes away, but then when it straightens up noise comes back again, then when going around right hand bend noise does not go away. I have put in new lowered spings, shocks, radius rods & bushes, control arm bushes and I changed the left front wheel bearing hub and the noise is still there. any ideas on what it could be?? Should I possibly change the right Front Bearing hub as well??
Check for grease spray around your cv joints could be them
 
Top