CPT James t
New Member
- Joined
- Jun 30, 2017
- Messages
- 24
- Reaction score
- 3
- Points
- 3
- Age
- 62
- Location
- Hobart tas
- Members Ride
- Vn commodore
Pls help, how do u remove the auto trans if i cant get the torgue convertet bolt off.
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
You need to unbolt the TC from the plate and push it in before unbolting the trans same when fitting it stays in until the trans is bolted back up.Isn't the torque converter in side the transmission, removing the bow housing is what separates the box and motor.
Oh those 3 bolts.You need to unbolt the TC from the plate and push it in before unbolting the trans same when fitting it stays in until the trans is bolted back up.
How do you get to the three bolts.You need to unbolt the TC from the plate and push it in before unbolting the trans same when fitting it stays in until the trans is bolted back up.
Other words you don't know.You buy a manual and read the instructions.
You remove the dust cover or there should be a inspection plate at the bottom, before removing it mark with a paint pen or marker to line it back up the plate and converter, on some you remove the starter motor to gain assess.How do you get to the three bolts.
you cannot remove the inspection plate it goes under the back of the motor, also my trans has three plugs two white ones and the speedo is the normal for a vp berlina, or has some one switched out the trans.Other words you don't know.
You remove the dust cover or there should be a inspection plate at the bottom, before removing it mark with a paint pen or marker to line it back up the plate and converter, on some you remove the starter motor to gain assess.
Here is a free vs workshop it may help. https://drive.google.com/open?id=1O_KnoV949n0q46my7P2YLbmQ1Djr1SpJ