My drivers seat broke away from the runners, so I took it out and stripped it, welded it up and put it back together, once I have it back in the car the hieght adjuster keeps going to the top once I get out and take the weight off it.
If I set it to about half way if I go over a bump it goes to the bottom again. All the nuts are tight and in the right places, only things I had spare were 2 little rubber things.Did not see where they come from.I stripped it outside at night as the wife needed to car in the morning, and I could not get into the garage due to a dead 4x4 in the way
If I set it to about half way if I go over a bump it goes to the bottom again. All the nuts are tight and in the right places, only things I had spare were 2 little rubber things.Did not see where they come from.I stripped it outside at night as the wife needed to car in the morning, and I could not get into the garage due to a dead 4x4 in the way