Nemesis04
New Member
- Joined
- Jan 25, 2009
- Messages
- 12
- Reaction score
- 0
- Points
- 1
- Location
- Victoria
- Members Ride
- 04 VYII Equipe MY16 VFII Calais V
Hi All,
Am after the wiring diagram on the Level 1 Cluster, if anyone has it that would be awesome!
If possible the wiring diagram for the BCM aswell, mainly pin outs and what controls what...
Also, does anyone have any specifications on how the needles are controlled? whether its pulse (I'm sort of thinking this might be the case...) or a simple analogue signal (0V is 0km/h... 12V is 220km/h etc).
I'm assuming the status lights are just On or Off.... duh
I need to be able to daisy chain off the Speedo, RPM, ODO (pulse click every 20-25 meters?), Fuel, and possibly the temperature (just for kicks )...
What's it for? Well...
I'm looking at designing my own Trip Computer using a microcontroller coupled with a graphics LCD, much like what you find on newer Commodores... pretty!...
From what I've read... it would be ALOT easier (and more entertaining ) then sourcing another Level 3 cluster with similair ODO without LCD bleeding, wiring looms, potentially another BCM and the Trip Control box... which ironically I already have as I'll use it to control the micro in a similair fashion.
The moment I find a Calais at the local wreckers... it's already been gutted
Cheers, Nem04
Am after the wiring diagram on the Level 1 Cluster, if anyone has it that would be awesome!
If possible the wiring diagram for the BCM aswell, mainly pin outs and what controls what...
Also, does anyone have any specifications on how the needles are controlled? whether its pulse (I'm sort of thinking this might be the case...) or a simple analogue signal (0V is 0km/h... 12V is 220km/h etc).
I'm assuming the status lights are just On or Off.... duh
I need to be able to daisy chain off the Speedo, RPM, ODO (pulse click every 20-25 meters?), Fuel, and possibly the temperature (just for kicks )...
What's it for? Well...
I'm looking at designing my own Trip Computer using a microcontroller coupled with a graphics LCD, much like what you find on newer Commodores... pretty!...
From what I've read... it would be ALOT easier (and more entertaining ) then sourcing another Level 3 cluster with similair ODO without LCD bleeding, wiring looms, potentially another BCM and the Trip Control box... which ironically I already have as I'll use it to control the micro in a similair fashion.
The moment I find a Calais at the local wreckers... it's already been gutted
Cheers, Nem04