Kristian Grixti
New Member
- Joined
- Apr 3, 2020
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 31
- Location
- Tasmania
- Members Ride
- VR Berlina
Hey all I've converted my VR Berlina from auto to manual using the VR manual loom and computer but my reverse lights won't work off the VR manual loom , I know I can run two wires from the inhibitor switch to the box to get them to work but was going to try an use the ones on the manual loom , any way off doing this ? , I did read something about swapping few wires on BCM to make them work on manual loom ,, can anyone help me out,, or guide me in the right direction to do so