Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VR Motor into VK Alternator Wiring

lighty82

New Member
Joined
Dec 8, 2008
Messages
3
Reaction score
0
Points
0
Members Ride
VK Off-Road Race Car
Have just finished putting a VR motor with VN computer into our VK off road race car and having a crap of a time working out the alternator.

We have got a known working alternator, coz we think our mate fried the first one we had. What wires need to go where??

I think the pin marked S needs to go to the 12V feed (ie. from the battery isolator), and the L pin needs to go to the warning light on the dash (but where is the other side of the light connected +12v of -gnd).

Cheers
Brenton
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,993
Reaction score
434
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
switched 12 volt ignition feed through alt light then to alternator should be a big red wire to bat + on the bolt and a second little wire runs to the battery too cant remember the colour of the one to BAT and the one for the light
 
Top