21AZI
New Member
- Joined
- Jul 11, 2009
- Messages
- 28
- Reaction score
- 0
- Points
- 0
- Members Ride
- VL Calais Turbo
Hi there,
I have a holden Rodeo 1992 that i have put a VR v6 3800 s/2 auto engine into. I have finally come to the realisation that the auto has to go and be replaced with a t5 manual. (Nos kills the too meany auto).
I have done the t5 Manual Conversion to the car but now I up to wiring. My problem is i have been told that i have to change the complete wiring harness and ecu, is this true. I have also been told that i have to change the speed sensor aswell,
I do not what to change the ecu as it has a chip talk chip in my ecu.
What do I have to do?
Thanks for any help
I have a holden Rodeo 1992 that i have put a VR v6 3800 s/2 auto engine into. I have finally come to the realisation that the auto has to go and be replaced with a t5 manual. (Nos kills the too meany auto).
I have done the t5 Manual Conversion to the car but now I up to wiring. My problem is i have been told that i have to change the complete wiring harness and ecu, is this true. I have also been told that i have to change the speed sensor aswell,
I do not what to change the ecu as it has a chip talk chip in my ecu.
What do I have to do?
Thanks for any help