dantheman78
New Member
- Joined
- Aug 31, 2006
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Members Ride
- VR Executive s2
just wondering if nebody no's if i can stick a vn/vp auto tranny in my vr and if so what problems occur from doing so??? cheers
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
vr transmission
- Thread starter dantheman78
- Start date
TheForgotten
only human......
- Joined
- Dec 24, 2005
- Messages
- 1,372
- Reaction score
- 18
- Points
- 0
- Location
- quarantine
- Website
- www.holdenscene.com
- Members Ride
- VR EXEC
Hydraulic, not hydromatic.holden007 said:
not 100% sure about the wiring, but yes it will bolt up. wiring for the box is different, in that it's not on the engine loom like VR/VS.
PaRaDoX
From the old days
- Joined
- Apr 16, 2005
- Messages
- 3,288
- Reaction score
- 34
- Points
- 48
- Location
- Melbourne, Victoria
- Members Ride
- BMW N54 Twin Turbo
there is 2 parts to the "transmission"
they'res the gear box and the transmission its self...
im not %100 sure if they are cross compadible.. but dan take me for a drive and and well see how bad it slips... might just need a new gear...
ive seen this car
its nutz... bit of a jump from a VK to a VR
they'res the gear box and the transmission its self...
im not %100 sure if they are cross compadible.. but dan take me for a drive and and well see how bad it slips... might just need a new gear...
ive seen this car
its nutz... bit of a jump from a VK to a VR
PaRaDoX
From the old days
- Joined
- Apr 16, 2005
- Messages
- 3,288
- Reaction score
- 34
- Points
- 48
- Location
- Melbourne, Victoria
- Members Ride
- BMW N54 Twin Turbo
just a update found out that if it bolts up... it will work
you'll have to run a VN ecu, with a VN wiring loom...
then run a VR manual tune for it with a few things modified...
i can do the tune for ya...
went for a ride in this car today... torque converter is slipping BAD... it magically jumps out of hear like you just pressed the clutch in
you'll have to run a VN ecu, with a VN wiring loom...
then run a VR manual tune for it with a few things modified...
i can do the tune for ya...
went for a ride in this car today... torque converter is slipping BAD... it magically jumps out of hear like you just pressed the clutch in