gilskink
New Member
- Joined
- Mar 20, 2013
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Location
- Perth
- Members Ride
- VR Commodore V6
So here is my problem.
The car is a 94 VR V6 Automatic
Just changed my engine mounts and decided to change the trans mount at the same time.
When i bought the mount from Veale's he gave me a mount with 4 large holes and 2 smaller holes.
Now i know the smaller holes are to bolt the mount to the crossmember, thats all sweet.:spot on:
But the issue comes about when i go to bolt the socket headed cap screws into the end of the trans. the mount has 4 holes, but there is only 2 available holes to bolt into. Do the V6's only use 2 holes? Is there a different mount specific to the VR.
Any help would by greatly appreciated and ill answer any questions you have towards my problem and things i have done so far.
Cheers
The car is a 94 VR V6 Automatic
Just changed my engine mounts and decided to change the trans mount at the same time.
When i bought the mount from Veale's he gave me a mount with 4 large holes and 2 smaller holes.
Now i know the smaller holes are to bolt the mount to the crossmember, thats all sweet.:spot on:
But the issue comes about when i go to bolt the socket headed cap screws into the end of the trans. the mount has 4 holes, but there is only 2 available holes to bolt into. Do the V6's only use 2 holes? Is there a different mount specific to the VR.
Any help would by greatly appreciated and ill answer any questions you have towards my problem and things i have done so far.
Cheers