hey. anyone know of a thread or how to on changing the tail lights on a vs/vr commo i just picked up a pair and was wondering how i install them. thanks for the help guys.
i dont know of a thread but this is a quick run down of what to do: 1)open ya boot 2)unscrew the nuts on the inside of the boot(theres only a couple on each tail light) 3)pull old tail light out and pull the cable things out of it they have the bulbs on it 4)grab new tail light put the bulbs into new tail light make sure they click and aint gonna fall out 5)place back in position on car and screw nuts up do same for opposite side for the smaller ones there nuts are on the inside of your boot lid just unscrew them and unconnect the wire plug and place new one and connect the plugs back together and screw them back in. once all are in turn car on check they are all working hope this helps im going off my memory and i did it ages ago
cheers mate. i understand. one of the stupid bolts were stopping my boot from locking lol. well we have rain for the next week. so maybe on the weekend i will give it a go. hopefully then i wont get a wet boot!
That would be sweet...its a really easy mod but changes the whole appearance of your car i think a how to on it would help alot of people.
i didnt realise how easy it was.. pull the carpet out.. undo the bolts. pull em out.. haha i didnt bother with the write up..
