Vs 304 conversion into vn v6

[Shaun4519]

Need some help guys doing a 304 and 4l60e into vn v6 manual . Ive got all the gear out of a vs stato im using the vs engine loom and pcm
Issure is the is one plug at the fuse panel that doesnt match up to my vn body loom
Hoping someone can tell me wat color wire go were the photo is of the vs engine loom plug im talking about

 

[FXST01]

Which Terminal belongs to the VN?

Is there a Green/White wire hiding behind the Red on the RHS connector?

 

[FXST01]

OK, obviously not an emergency then.

 

[MR.HG]

Sorry to dig up an old thread however I'm having a similar issue.
Does this loom come in a 1 meter section? I have discovered this loom controls the fuel pump.... does it also control spark?

I bought a vs ute with a 304 conversion a few years back and have rebuilt the engine, I removed the 1 meter long loom to paint the engine bay only to discover the connection was dodgy with spliced wires and cheap individual female plugs and no connector plug.... just 6 individual loose plugs and I have no idea where they go. Will it be easy to locate another loom or easy enough to figure out which plug goes where?

 

[IGMG]

Need some help guys doing a 304 and 4l60e into vn v6 manual . Ive got all the gear out of a vs stato im using the vs engine loom and pcm
Issure is the is one plug at the fuse panel that doesnt match up to my vn body loom
Hoping someone can tell me wat color wire go were the photo is of the vs engine loom plug im talking about View attachment 191625 View attachment 191625

hi just wondering if you figure out how to wire your looks up I am having same issue
thanks

 

[Chizza86]

Which Terminal belongs to the VN?

Is there a Green/White wire hiding behind the Red on the RHS connector?

Would U no how to over come this problem as I'm going through the same issues