Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

vs auto transmission fit s1 to s2

statesman_man

New Member
Joined
Jan 14, 2011
Messages
3
Reaction score
0
Points
0
Location
Sydney Australia
Members Ride
1995 Stateman
Does anyone know if a series 2 transmission will fit a series 1 without the need to change the computer etc..?
 

justbad4you

IF YOR NOT A HOLDEN
Joined
Sep 29, 2005
Messages
1,669
Reaction score
19
Points
0
Location
MELBOURNE S/E BAYSIDE
Members Ride
97 VT BERLINA/ 98 VS SIII MALOO (RED) LX SLR5000
yes it will
Does anyone know if a series 2 transmission will fit a series 1 without the need to change the computer etc..?[/QUOTE s1 and s2 flexplates (what theyre called in auto's flywheels for manual) are different but its not really an issue as auto is driven off the torque convertor which bolts to your flywheel.
both boxes are same hydraulic so no wiring differences or
 

justbad4you

IF YOR NOT A HOLDEN
Joined
Sep 29, 2005
Messages
1,669
Reaction score
19
Points
0
Location
MELBOURNE S/E BAYSIDE
Members Ride
97 VT BERLINA/ 98 VS SIII MALOO (RED) LX SLR5000
yes it will fit
Does anyone know if a series 2 transmission will fit a series 1 without the need to change the computer etc..?
s1 and s2 flexplates (what theyre called in auto's flywheels for manual) are different but its not really an issue as auto is driven off the torque convertor which bolts to your flywheel.
both boxes are same hydraulic so no wiring differences or
 

Brett_jjj

Well-Known Member
Joined
Oct 16, 2009
Messages
6,805
Reaction score
92
Points
48
Location
Tamworth NSW
Members Ride
vs commodore
As long as the transmissions both have 13 pins in their electrical connectors, they will fit the VS.The VR models had the same 4L60E auto transmission,and it will bolt straight up to a VS,but the electrical connector on the VR only has 12 pins,not 13 like the VS,so it wont run properly. This is where it gets confusing.But as I said,just make sure they both have 13 pins in their connectors and they will be fine in the VS.
 
Top