alex2_s
Member
- Joined
- Oct 24, 2008
- Messages
- 197
- Reaction score
- 2
- Points
- 18
- Location
- Newcastle NSW
- Members Ride
- VFII SV6 Sedan Auto
Has anyone had an issue with the genuine holden CAI not fitting the VS (to ecotec) and any 'best method' solutions... the pipe that goes from the OTR duct to the airbox doesn't have enough clearance without putting pressure and bending the transmission cooler hose coming out of the radiator about an inch or so.... I'm thinking of putting a spacer under the airbox to raise the entire assembly and clearing the hose, but perhaps this might not make the duct fit properly over the radiator (bonnet closing etc)...
anyone had any experience/ thoughts?? also is my cooler hose different from others... never heard of this problem before and all everywhere seems to say is "the supercharged CAI will bolt right onto the ecotec" etc etc....
PS. i DID learn the hard way and think the cooler hose would survive but it didn't after a couple of days and pissed out fluid everywhere as it split at the clamp. quite embarassing
anyone had any experience/ thoughts?? also is my cooler hose different from others... never heard of this problem before and all everywhere seems to say is "the supercharged CAI will bolt right onto the ecotec" etc etc....
PS. i DID learn the hard way and think the cooler hose would survive but it didn't after a couple of days and pissed out fluid everywhere as it split at the clamp. quite embarassing