VS Commodore Sensor Problems ???

[steven2760]

Hi, i am new to this site. I am wanting to know if anyone can help me.

I am having Problems with my VS Commodore.

A few weeks ago my Fan Belt snapped and wrapped around the bottom Pulley, which snapped the crank angle sensor and destroyed the bottom pulley.

I replaced the Fan Belt, Bottom Pulley, and Crank angle sensor. Since doing that i have been having troubles with the car stalling at lights, and when it does stall it starts straight away, and also it is miss firing.

This morning i have done the check on the error codes, and i am getting Code 47.

When i brought the Crank angle Sensor, it was new in the packet. Is it possible i have brought a faulty 1 ???

Thanks Steven.

 

[TheForgotten]

possible yes. also possible that in destroying the sensor the belt also wiped out the wiring, which would present the same issues

 

[steven2760]

I checked the wiring and all seems to be good. Do you think it could have something to do with the Coil Pack?

 

[hako]

Also check you have the correct balancer pulley for your engine number/VIN.

Edit....series 1 and series 2 VS models have a different harmonic balancer.

 

[Brett_jjj]

Disconnect the battery for a couple of minutes to clear any logged codes.See if that makes any difference.

 

[steven2760]

i after vt parts around penrith ??

 

[Brett_jjj]

Did you sort out the sensor and error code problems?