Vs commodre front strut mounts

[Corey aylward122]

Hey just wondering if anyone has a torque setting spec for the front strut tower mounts the ones that the strut mounts to... currently painting my bay

 

[BlackVXGTS]

From the VS Workshop Manual:

"While holding the strut rod from turning with a 10 mm socket, tighten the upper strut rod retaining nut to the correct torque specification, using a 24 mm (15/16") ring spanner with a torque wrench attached.
UPPER STRUT BEARING RETAINING NUT TORQUE SPECIFICATION 50 - 60 Nm"