Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VS Ecotec Extractors - Manual and Auto??

dashdown98

New Member
Joined
Jun 23, 2013
Messages
37
Reaction score
0
Points
0
Location
Tasmania
Members Ride
2003 VY S Commodore SII
So I found someone selling a set of VS V6 extractors (Bottom left of pic)

11666220_483122631837714_860264157053551216_n_zpsyz1wcsov.jpg


My question is, are the auto and manual ones the same? I've done a bit of research but can't make any sense of it. If I get these will they bolt up to the existing Y-pipe? Should I need anything else to get it hooked up?

Cheers.
 

EYY

Well-Known Member
Joined
Mar 6, 2011
Messages
5,752
Reaction score
2,032
Points
113
Location
Vic
Members Ride
VS Statesman
You'll need to have your existing y piece cut and flanges welded to it. Otherwise you'll need to have one fabricated from scratch
 

mickVS84

Member
Joined
Mar 26, 2015
Messages
182
Reaction score
1
Points
18
Location
townsville
Members Ride
vs commodore
My extractors on my vs manual are sort of the same except on the right hand side, 1 of 3 the pipes is bolted on seperate near the flange. And like EYY said you will need flanges welded on Y pipe.
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,639
Reaction score
1,364
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
Pacemaker has that pipe separate and bolts on, most others are all one piece.

As EYY said, you will need to modify the Y pipe. They look like they should fit, but some brands the auto set will not fit the manual, they hit the bell housing, and the manual will not fit the auto as they hit the transmission pan.
 
Top