My VS2 indicators don't self cancel, I rang Holden spares and the guy said that a indicator cancel cam ($15.56) is what I need to purchase, he said it attaches to the underneath of the steering wheel.
I have repaired a VB before by replacing the little spring/wires and also the indicator cancel cam, but the Holden guy said that the VS does not use the spring/wires. My question is what does the cancel cam rub on to cancel the indicator, as I don't want to get it apart only to find that I need more parts than the cam, as it's half an hour to the nearest dealer.
My VS does not have an airbag, so I guess it is a similar process to the VB,
EG Disconnect battery, remove the centre horn cover by removing screws from underneath, undo the nut that holds the wheel on, use the puller to get the wheel off, replace the cancel cam, reassemble.
Any suggestions to help me do the job would be much appreciated.
I have repaired a VB before by replacing the little spring/wires and also the indicator cancel cam, but the Holden guy said that the VS does not use the spring/wires. My question is what does the cancel cam rub on to cancel the indicator, as I don't want to get it apart only to find that I need more parts than the cam, as it's half an hour to the nearest dealer.
My VS does not have an airbag, so I guess it is a similar process to the VB,
EG Disconnect battery, remove the centre horn cover by removing screws from underneath, undo the nut that holds the wheel on, use the puller to get the wheel off, replace the cancel cam, reassemble.
Any suggestions to help me do the job would be much appreciated.