ephect
Donating Member
- Joined
- Jul 27, 2006
- Messages
- 5,918
- Reaction score
- 15,520
- Points
- 113
- Location
- Melbourne
- Members Ride
- VS Acclaim V6
yeap thats right. coil packs ontop, dfi module underneath.
to the guys that are having problems.. I've re-read the last couple pages and to be honest i cant keep track of whats goin on lol. its great to throw ideas round n whatnot, but without checking the simple things, most often things that dont cost a thing, u can go swapping bits n pieces for nothing hurting ur hip pocket. Dont get me wrong, im not sayin that this is the wrong way around, but its best to work on process of elimination. the thought process behind all of this is awesome, and so far everyone is doing a great job.
stuff that dont cost a penny..
clean your battery terminals
check & clean/renew your earth wires
check all hoses, vacuum & coolent for leaks
check sensor/operation plug wires for damage
follow simple guides to test/check electrical devices (like teh above dfi heat check)
check & note down codes
clear codes, then check again in a week
maintanence..
oil change
filter renewal
check/top up coolent (bleed)
check plugs/leads renew if necessary
I have specific codes which i am/have been slowly (work has been busy) working on. tomorrow i have a day off, so im purchasing new o2 sensors which should be the final piece to solve my puzzle, i've done all the small things.
to the guys that are having problems.. I've re-read the last couple pages and to be honest i cant keep track of whats goin on lol. its great to throw ideas round n whatnot, but without checking the simple things, most often things that dont cost a thing, u can go swapping bits n pieces for nothing hurting ur hip pocket. Dont get me wrong, im not sayin that this is the wrong way around, but its best to work on process of elimination. the thought process behind all of this is awesome, and so far everyone is doing a great job.
stuff that dont cost a penny..
clean your battery terminals
check & clean/renew your earth wires
check all hoses, vacuum & coolent for leaks
check sensor/operation plug wires for damage
follow simple guides to test/check electrical devices (like teh above dfi heat check)
check & note down codes
clear codes, then check again in a week
maintanence..
oil change
filter renewal
check/top up coolent (bleed)
check plugs/leads renew if necessary
I have specific codes which i am/have been slowly (work has been busy) working on. tomorrow i have a day off, so im purchasing new o2 sensors which should be the final piece to solve my puzzle, i've done all the small things.