Wozza
Well-Known Member
- Joined
- Dec 13, 2011
- Messages
- 1,925
- Reaction score
- 317
- Points
- 83
- Location
- Adelaide
- Members Ride
- VR_GS commodore
manual says
unplug the connector and check the ohms across pins A and B then C and D each check should indicate 40 to 80 ohms if not replace
or use a scan tool/aldl cable
there should be slack in the cable at the TB not much 1 to 2mm
unplug the connector and check the ohms across pins A and B then C and D each check should indicate 40 to 80 ohms if not replace
or use a scan tool/aldl cable
there should be slack in the cable at the TB not much 1 to 2mm