cb754
New Member
Hi all, have just changed the DFI, after changing out the CAS, TPS, coil packs and leads. And is now running on all 6 cylinders, but idle is running about 3000 rpm, (no taco), Where to look next..????
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
VS V6, DFI changed
- Thread starter cb754
- Start date
cb754
New Member
removed the idle sensor, checked all that, took off battery terminal for half hour or more.
Reset ignition..... how do I do that. new to that one.
Wozza
Well-Known Member
- Joined
- Dec 13, 2011
- Messages
- 1,925
- Reaction score
- 317
- Points
- 83
- Location
- Adelaide
- Members Ride
- VR_GS commodore
Vacuum leak somewhere?
or maybe this?
https://forums.justcommodores.com.au/threads/base-idle.16514/
removing the neg battery term or pcm fuse will reset the pcm/ecu or and Im assuming the ignition
or maybe this?
https://forums.justcommodores.com.au/threads/base-idle.16514/
removing the neg battery term or pcm fuse will reset the pcm/ecu or and Im assuming the ignition
cb754
New Member
Thanks Wozza, will give that a goVacuum leak somewhere?
or maybe this?
https://forums.justcommodores.com.au/threads/base-idle.16514/
removing the neg battery term or pcm fuse will reset the pcm/ecu or and Im assuming the ignition
cb754
New Member
Got to drive the ute to work today. all going good. had to put the old TPS back in, new one faulty or not right one. still was idling high, pulled the plugs on the tps and iac while running, idle returned to norm and could gun motor ok. replaced plugs....and all is good.