VSIII Ute Getting Stuck in First and Reverse

[AlexCameron23]

VS III V8 Ute stuck in first and reverse sometimes with the clutch engaged. Will creep unless i have my foot on the brake. If im in traffic and cant take off only option is to stop, turn off the ignition, Double the clutch which will release shifter from gear and start again. Usually in first after a good run and alot of start stop. Clutch adjustment maybe? Getrag issues? Any one had similar problems?

 

[rambunctious]

Master cylinder/slave cylinder issue.
One or both is bypassing/leaking back.

 

[AlexCameron23]

Bleed the system?

 

[losh1971]

Bleed the system?

You could try that, just because you can and it's free. If it's bypassing then you need a new part or at least a new kit put through it. That's providing the bore isn't worn.