jamby
New Member
- Joined
- Aug 11, 2013
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Location
- warrnambool
- Members Ride
- vt ss 5.0
Hi there, not sure if this is covered else where but here goes...
I have a VT ss 5 Litre
I connected a scanner to the car to check the abs module which resulted in the scanner having a no communication error
So im assuming that is an indication of a faulty ABS module
But.. the abs harness connector itself has some broken plastic etc around the connector that is exposing pins
What I am wanting to know is it hard/possible to replace that module harness??
If so can anyone advise me of how to do so
Thanks heaps
I have a VT ss 5 Litre
I connected a scanner to the car to check the abs module which resulted in the scanner having a no communication error
So im assuming that is an indication of a faulty ABS module
But.. the abs harness connector itself has some broken plastic etc around the connector that is exposing pins
What I am wanting to know is it hard/possible to replace that module harness??
If so can anyone advise me of how to do so
Thanks heaps