bbb
New Member
- Joined
- May 18, 2009
- Messages
- 88
- Reaction score
- 0
- Points
- 0
- Members Ride
- 2010 Sv6 Wagon
Hey guys...can anyone make a suggestion..
I have just replaced the heater tap, all pipes connected system bled...etc etc now there is no heat coming out the vents???
The car get's up to temp all ok (and temp guage read's between quater and half) and the a/c work's fine but when i set the climate control to 30 or H or any temp for that fact it stills blows cold air??
Before any one ask yes it has a thermostat in and has just been replaced.
Things been changed recently..
*Radiator
*all pipes
*thermostat
and now now heater tap.
The motor did get bloody hot when the heater tap **** itself on the freeway but seems to run fine...no water in the oil or vice versa. I have searched pics and all the pipes are connected up right for the heater tap.
On a side note they fan speed amplifier was changed about 12months ago so no problems with the fan speed control's etc..
Any suggestions be great....
Cheers
BBB
I have just replaced the heater tap, all pipes connected system bled...etc etc now there is no heat coming out the vents???
The car get's up to temp all ok (and temp guage read's between quater and half) and the a/c work's fine but when i set the climate control to 30 or H or any temp for that fact it stills blows cold air??
Before any one ask yes it has a thermostat in and has just been replaced.
Things been changed recently..
*Radiator
*all pipes
*thermostat
and now now heater tap.
The motor did get bloody hot when the heater tap **** itself on the freeway but seems to run fine...no water in the oil or vice versa. I have searched pics and all the pipes are connected up right for the heater tap.
On a side note they fan speed amplifier was changed about 12months ago so no problems with the fan speed control's etc..
Any suggestions be great....
Cheers
BBB