Vt cruise control connections

[trublue]

Hello I have a vt commodore I’ve just added cruise control. The cruise control is off an other vt all but a patch harness for under the dash. It a Holden genuine part 90257294. I have
Everything connected but 3 wires 1 white wire... Yellow wire with a red stripe and a grey wire. They come off the new harness would have any one know where they go to?. Any help would be truly appreciated as I’ve been trying to figure it out for 3 weeks lol thank you

Cheers all

 

[Trevor loves holden.]

White wire is pulse wire I think as the car white wire is speed sensor.

 

[trublue]

I imagine one goes to your brakes one to your speedo one to earth.

Hi Trevor
Yes got the brake one connected. Not sure where it would go to the speedo and the earth one I don’t know lol . Thank you for you help chores

 

[Trevor loves holden.]

https://www.google.com/url?sa=t&rct...t-vx.214604/&usg=AOvVaw1ypcK6HzWSMd_kOqyHOpef

 

[Trevor loves holden.]

hi

 

[Trevor loves holden.]

I know Power Antenna - Yellow/Red on VT, Illumination OUTPUT - Grey (VT onwards)
but don't hold me on if that's where your wires have to go. best if you go to holden and ask.

 

[trublue]

I’m so lost lol

 

[Trevor loves holden.]

I’m so lost lol

Show some photos and which part are the wires are coming from, white is normally speed sensor , yellow and red has to be accessories wire as its the same as for power to electric aerial, grey be the light to say its active on the cluster. That's how I see it.