Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Vt driver's side engine mount tips

yz300

Member
Joined
Jul 23, 2016
Messages
160
Reaction score
12
Points
18
Location
vic
Members Ride
1998 vt wagon
Hi. I've been told my engine mounts need changing as my vt wagon is shaking pretty reasonably. I did the left one as i.ve done it on another car so knew what to do. The right side doesn.t look as easy. Does anyone have any tips to make it the easiest it can be? Things to move out of the way etc? On the left it wasn.t a matter of just letting the jack down and lining the threads up with the holes as the threads on the bottom of the mounts were longer so i had to put the mount in the bottom holes and lower the engine down until the holes lined up on the side of the engine and play round with it a bit. Aftermarket mounts. Any tips? Thanks in advance, Gus.
 
Top