Hi
I noticed you have a vt s1 wagon.
My s1 wagon had no wiring at all. I had to install everything. Including relays wiring to them, under console, door looms.
My advice would be go somewhere, where you can disassemble everything you need, & take photos of plugs. Make sure the wire colours are noticeable in photos (for future reference), especially where which coloured wires go into which BCM plugs & relays.
Door looms must be s1, because s2 door loom plugs are different.
If you pull it all out yourself, will make a lot easier to put back into your car.
I hope this helps.
Lex