Peter1960
New Member
- Joined
- May 8, 2019
- Messages
- 24
- Reaction score
- 1
- Points
- 3
- Age
- 64
- Location
- Browns Plains
- Members Ride
- VT Holden Commodore
Hi, Fellow enthusiasts Great Site !!
I'm posting this up on behalf of my dad,
My dads' car is a 2000 Model VT Spac,
Ok to cut a long story short, Ther car Started life as a standard v6 but my dad had the old motor swapped out for a super six, it has an upgraded pulley, extractors and was driving great for approx 6months and then all of a sudden would just stall at random (but never at HWY speed) Just local traffic (inc reversing out of the driveway). Since this started the car has had the following replaced:
IAC Valve
TPS
All Coils, Leads, and Plugs (Genuine Replaced)
Aftermarket Engine Immobiliser Disconnected at Autobarn
Also Diagnostic Done 3 times but no fault codes!!
The car was being run on Caltex Vortex 95 when the stalling started, However car was then changed over to 91 Ron (not egen) stalling got worse and now car is running on 95 from another different petrol station and is running alot better but is still stalling!!!
Any help would be much appreciated!! Regards Peter.
I'm posting this up on behalf of my dad,
My dads' car is a 2000 Model VT Spac,
Ok to cut a long story short, Ther car Started life as a standard v6 but my dad had the old motor swapped out for a super six, it has an upgraded pulley, extractors and was driving great for approx 6months and then all of a sudden would just stall at random (but never at HWY speed) Just local traffic (inc reversing out of the driveway). Since this started the car has had the following replaced:
IAC Valve
TPS
All Coils, Leads, and Plugs (Genuine Replaced)
Aftermarket Engine Immobiliser Disconnected at Autobarn
Also Diagnostic Done 3 times but no fault codes!!
The car was being run on Caltex Vortex 95 when the stalling started, However car was then changed over to 91 Ron (not egen) stalling got worse and now car is running on 95 from another different petrol station and is running alot better but is still stalling!!!
Any help would be much appreciated!! Regards Peter.