Raz R
New Member
- Joined
- Jun 25, 2019
- Messages
- 12
- Reaction score
- 0
- Points
- 1
- Age
- 32
- Location
- Melbourne
- Members Ride
- VX Calais 2002 V6
Hello everyone.
I've been trying to diagnose this issue on my car for a while and I'd really appreciate if you guys can help me at all.
The Issue:
Currently, when I try to use the Climate Control module (which starts on A/C by default), it triggers the horn (constant), wipers, indicator, radiator fan, power steering loss and all the interior lights to go off. But when the A/C button is pressed to turn off the car goes back to normal.
I tried OBDII but found of this version of the car supports ALDL with OBDII connector.
So if you guys know any ALDL bluetooth scan tool, please kindly share the link.
I did get fault codes from jumping the OBDII connector, (I do already have ABS, TRAC OFF, engine, oil and SRS light on)
Following are the codes:
0113 Air intake sensor
1255 MAP
0101 MAF
0342 Camshaft position sensor
0200 fuel injector
0164 HVAC no comms
1571 Electronic break Control
I did spend a couple hundred to change the ABS as an electrician told me to but I had no luck there.
Do you guys think the problem is only linked to the faulty sensor or is there anything like PCM, BCM or ECU that needs replacing or could this be a ground wire issue? (all the fuses are OK in both boxes)
Cheers for taking the time to read, any help would be greatly appreciated.
I've been trying to diagnose this issue on my car for a while and I'd really appreciate if you guys can help me at all.
The Issue:
Currently, when I try to use the Climate Control module (which starts on A/C by default), it triggers the horn (constant), wipers, indicator, radiator fan, power steering loss and all the interior lights to go off. But when the A/C button is pressed to turn off the car goes back to normal.
I tried OBDII but found of this version of the car supports ALDL with OBDII connector.
So if you guys know any ALDL bluetooth scan tool, please kindly share the link.
I did get fault codes from jumping the OBDII connector, (I do already have ABS, TRAC OFF, engine, oil and SRS light on)
Following are the codes:
0113 Air intake sensor
1255 MAP
0101 MAF
0342 Camshaft position sensor
0200 fuel injector
0164 HVAC no comms
1571 Electronic break Control
I did spend a couple hundred to change the ABS as an electrician told me to but I had no luck there.
Do you guys think the problem is only linked to the faulty sensor or is there anything like PCM, BCM or ECU that needs replacing or could this be a ground wire issue? (all the fuses are OK in both boxes)
Cheers for taking the time to read, any help would be greatly appreciated.