Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Vx 3rd row seating
- Thread starter Sheryllee
- Start date
wraith
Hand over the dog bikkies
- Joined
- Sep 17, 2008
- Messages
- 5,014
- Reaction score
- 117
- Points
- 63
- Location
- Demonicaland
- Members Ride
- VX V6 Berlina. 2003 VW Passat
Mounting points need to be added. Looking at a few thousand to do it properly/engineered.
Sheryllee
New Member
- Joined
- May 25, 2019
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Age
- 34
- Location
- Rosebud
- Members Ride
- Vx commodore wagon
Thank you.
How about the VT acclaim s2. I was told they already have the mounting points?
So I would just need the engineering certificate?? Any idea how much that would be???
How about the VT acclaim s2. I was told they already have the mounting points?
So I would just need the engineering certificate?? Any idea how much that would be???
wraith
Hand over the dog bikkies
- Joined
- Sep 17, 2008
- Messages
- 5,014
- Reaction score
- 117
- Points
- 63
- Location
- Demonicaland
- Members Ride
- VX V6 Berlina. 2003 VW Passat
None of them came out with factory 3rd row so chances of them having mounting holes are pretty silm. There are a few companies that do 3rd row conversions you are probably best off speaking to them.
rambunctious
Well-Known Member
- Joined
- Jun 9, 2011
- Messages
- 2,360
- Reaction score
- 2,204
- Points
- 113
- Location
- Alexandra Headland Qld
- Members Ride
- VZ Executive Wagon
VX, like all wagons, had mounting points for cargo barriers, as well as, I believe, mounting points for the side cargo rails, so these points may be ??? ok for a 3rd seat.
Some years ago I fitted VK seats to an old holden one tonner and all I needed to do for engineering was drill holes through the floor, then fit a plate as a washer to the under side of the floor.
The plates required were 75x50x8 flat steel on each of the four bolts.
Talk firstly to someone who can certify the install.
Special vehicle builders/coach and body builders do this type of work as well.
Transport should be able to give you a list of engineers.
Some years ago I fitted VK seats to an old holden one tonner and all I needed to do for engineering was drill holes through the floor, then fit a plate as a washer to the under side of the floor.
The plates required were 75x50x8 flat steel on each of the four bolts.
Talk firstly to someone who can certify the install.
Special vehicle builders/coach and body builders do this type of work as well.
Transport should be able to give you a list of engineers.