Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
vx ignition renewal
- Thread starter Boyle
- Start date
accentstencil
Well-Known Member
- Joined
- Jun 30, 2005
- Messages
- 8,376
- Reaction score
- 586
- Points
- 113
- Age
- 71
- Location
- Caboolture South, QLD
- Members Ride
- WH II Caprice, 5.7 2018 Equinox LTZ V
It's not hard. The key blade needs to be coded to the new barrel.
Do a search on replacing the barrel, there should be numerous posts on the subject, it's getting late and I can't be bothered explaining it again right now.
I tried to search for you but it doesn't seem to be working at the moment.
Do a search on replacing the barrel, there should be numerous posts on the subject, it's getting late and I can't be bothered explaining it again right now.
I tried to search for you but it doesn't seem to be working at the moment.
krusing
Well-Known Member, Possibly for the wrong reasons
- Joined
- Jun 21, 2014
- Messages
- 5,398
- Reaction score
- 4,026
- Points
- 113
- Location
- Melbourne, Bayside
- Members Ride
- 2002 VY L67 Calais Sedan, 2012 VE L77 Calais Wagon
I believe it is easy, providing you have the correct tools,
Were you will need the Existing Key Head and it should work,
Remembering you will also need to replace the Drivers Door Barrel, and Boot Barrel
If its a S/Hand Barrel from a donor vehicle, Grab the Barrel, Key Blade, Door Barrel & Boot Barrel.
Were you will need the Existing Key Head and it should work,
Remembering you will also need to replace the Drivers Door Barrel, and Boot Barrel
If its a S/Hand Barrel from a donor vehicle, Grab the Barrel, Key Blade, Door Barrel & Boot Barrel.
accentstencil
Well-Known Member
- Joined
- Jun 30, 2005
- Messages
- 8,376
- Reaction score
- 586
- Points
- 113
- Age
- 71
- Location
- Caboolture South, QLD
- Members Ride
- WH II Caprice, 5.7 2018 Equinox LTZ V
Do you have the original key or not?
