Vx S Pack Dyno Results

[big_mack69]

hi, i just had my vx series 2 S pack Auto on a power run the other day and it only gave me 105kw at 174km/h i was just wondering if this was normal, i looked up the specs of the ecotec engine and it said it had 152kw, is this from the rear wheels or the engine.
Thanks

 

[lufkin]

from the flywheel

 

[Cameron P]

you have 105rwkw

the 152kw is the flyhwheel

 

[Cameron P]

im assuming you have no engine mods or anything? cause i worked out you car has 152 kw at the flywheel which is standard

 

[big_mack69]

Yeah it's just standard at the moment, want to do a cold air intake, bigger throttle body and extractors

 

[STL17]

105 is a good figure for a stock ecotec auto

 

[Cameron P]

i wouldnt bother with intake... go roller rockers $600 give or take and flash tune $350

 

[Cameron P]

105 is a good figure for a stock ecotec auto

its standard power lol

 

[DevilDRake]

Well to be precise, my motor stock was:

Starting Power: 109.8Rwkw

Then after i did exhaust/extractors + lukey air filter it was:

Current Power: 115.5Rrkw

 

[johnno010684]

dont know what my old ecotec was standard but after pacies, two high flow cats, twin 2.5 until first box then 2.5 single rear resi made 118rwkw's.