vx super 6 pulley

[super06]

hi just bought a supercharged vx it has a aftermarket pulley on the snout going by a boost gauge it had 8.5 psi i want to change it to a 10 or 10.5psi one but am not sure on what brand of pulley it is i have....i have posted some pics to see if anyone can identify it for me plz thanks in advance

 

[super06]

would it be better if i took some measurments of it and post it here

 

[wana s' charge stock vt]

if ya did measure it you would know/find out what boost its ment to have.. if its already the 10psi size ya shouldnt go any smaller/higher boost cause ya will loose power,(but if its got different rockers it will drop a bit of boost.. or guage could just be reading wrong, or have other issues causing ya to loose boost) .

but i know its not the same as mine, mine has 5 bolts not 6 and mine is a zzp pulley..

 

[wana s' charge stock vt]

Products Listing - V6 Performance Parts from Forced Induction Technologies
could be one of these, well its got 6 bolts

 

[vsl67]

This a Mace/ZZ performance setup

You should join this if you havent already
www.l67torque.com • Information

 

[super06]

thanks guys much appreciated yea im thinking its a FIT one

 

[airforceone]

its a fit one for sure

 

[super06]

thanks airforceone

 

[super06]

i have measured the pulley it is 86mm would any one be able to tell me what psi this pulley is please

 

[wana s' charge stock vt]

it would be 10psi pulley i think... 8.5psi Seems pretty close to normal to see on the guage straight up... Mine was about the same but hit or got close to 10psi towards red line...
Ya shouldn't go any smaller than what ya got now with out a cooler,